This is the latest recevied telemetry packets stored in our database for station/object SP2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1742107673 | 223 Count | 564 Count | 220 Count | 0 VDC | 0 VDC |
| 1742105872 | 166 Count | 422 Count | 164 Count | 0 VDC | 0 VDC |
| 1742104071 | 110 Count | 293 Count | 109 Count | 0 VDC | 0 VDC |
| 1742102271 | 57 Count | 162 Count | 57 Count | 0 VDC | 0 VDC |
| 1742100470 | 416 Count | 1050 Count | 410 Count | 0 VDC | 0 VDC |
| 1742098670 | 362 Count | 895 Count | 357 Count | 0 VDC | 0 VDC |
| 1742096869 | 305 Count | 740 Count | 301 Count | 0 VDC | 0 VDC |
| 1742095068 | 247 Count | 581 Count | 244 Count | 0 VDC | 0 VDC |
| 1742093268 | 189 Count | 438 Count | 187 Count | 0 VDC | 0 VDC |
| 1742091467 | 129 Count | 293 Count | 128 Count | 0 VDC | 0 VDC |
| 1742089667 | 62 Count | 132 Count | 62 Count | 0 VDC | 0 VDC |
| 1742087866 | 484 Count | 1102 Count | 477 Count | 0 VDC | 0 VDC |
| 1742086065 | 414 Count | 932 Count | 408 Count | 0 VDC | 0 VDC |
| 1742084265 | 348 Count | 772 Count | 343 Count | 0 VDC | 0 VDC |
| 1742082464 | 285 Count | 606 Count | 281 Count | 0 VDC | 0 VDC |
| 1742080664 | 228 Count | 470 Count | 225 Count | 0 VDC | 0 VDC |
| 1742078863 | 170 Count | 344 Count | 168 Count | 0 VDC | 0 VDC |
| 1742077062 | 116 Count | 231 Count | 115 Count | 0 VDC | 0 VDC |
| 1742075262 | 53 Count | 118 Count | 53 Count | 0 VDC | 0 VDC |
| 1742073461 | 613 Count | 1042 Count | 606 Count | 0 VDC | 0 VDC |
| 1742071660 | 554 Count | 931 Count | 548 Count | 0 VDC | 0 VDC |
| 1742069860 | 485 Count | 819 Count | 480 Count | 0 VDC | 0 VDC |
| 1742068059 | 412 Count | 698 Count | 408 Count | 0 VDC | 0 VDC |
| 1742066259 | 346 Count | 559 Count | 343 Count | 0 VDC | 0 VDC |
| 1742064458 | 277 Count | 437 Count | 275 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)