This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
---|---|---|---|---|---|
1740326521 | 4 V | 0.01 V | 244 mW | 36.3 degC | 100087.5 Pa |
1740326145 | 4 V | 0.01 V | 244 mW | 35.9 degC | 100075 Pa |
1740325817 | 4 V | 0.01 V | 242 mW | 36.1 degC | 100075 Pa |
1740325755 | 4 V | 0.01 V | 244 mW | 35.9 degC | 100087.5 Pa |
1740325381 | 4 V | 0.01 V | 254 mW | 35.3 degC | 100087.5 Pa |
1740325006 | 4 V | 0.01 V | 240 mW | 35.8 degC | 100100 Pa |
1740324633 | 4 V | 0.01 V | 216 mW | 35.7 degC | 100112.5 Pa |
1740324259 | 4 V | 0.01 V | 254 mW | 35.8 degC | 100100 Pa |
1740323993 | 4 V | 0.01 V | 240 mW | 36.2 degC | 100112.5 Pa |
1740323991 | 4 V | 0.01 V | 200 mW | 35.8 degC | 100112.5 Pa |
1740323885 | 4 V | 0.01 V | 240 mW | 36.2 degC | 100112.5 Pa |
1740323511 | 4 V | 0.01 V | 242 mW | 35.9 degC | 100125 Pa |
1740323135 | 4 V | 0.01 V | 240 mW | 36.2 degC | 100125 Pa |
1740322760 | 4 V | 0.01 V | 242 mW | 35.7 degC | 100137.5 Pa |
1740322387 | 4 V | 0.01 V | 240 mW | 36.2 degC | 100125 Pa |
1740322184 | 4 V | 0.01 V | 238 mW | 36 degC | 100125 Pa |
1740322001 | 4 V | 0.01 V | 244 mW | 36.4 degC | 100112.5 Pa |
1740321626 | 4 V | 0.01 V | 244 mW | 36.1 degC | 100125 Pa |
1740321251 | 4 V | 0.01 V | 244 mW | 36.1 degC | 100112.5 Pa |
1740320878 | 4 V | 0.01 V | 242 mW | 36.1 degC | 100112.5 Pa |
1740320503 | 4 V | 0.01 V | 244 mW | 36.1 degC | 100125 Pa |
1740320362 | 4 V | 0.01 V | 240 mW | 36.2 degC | 100137.5 Pa |
1740320122 | 4 V | 0.01 V | 242 mW | 35.7 degC | 100150 Pa |
1740319750 | 4 V | 0.01 V | 240 mW | 36.3 degC | 100150 Pa |
1740319377 | 4 V | 0.01 V | 204 mW | 36.6 degC | 100150 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)